Are you sick and tired of finding out how to change the battery in the Nissan key fob? If yes, then StepsHowTo is providing some easy tips on how to replace the battery in the Nissan key fob. The problem occurs when you press the key fob’s unlock button and nothing happens. In most cases, it doesn’t work because the battery is dead. You can try approaching a little closer to your car and attempt once more but nothing will happen.
This can be pretty frustrating at the start but you don’t need to be worried as such problems can be overcome easily. Remember that in most cases, a simple Nissan key fob battery change will solve your problems, so you shouldn’t need to replace your key fob just yet. Here we will guide you on how to change a battery in a Nissan key fob. Furthermore, for more related topics like How to Reset Oil Light In Vehicles, How to Execute Car Maintenance, How to Jump a Hybrid Car, How to Clean Car Interior at Home, and others explore the Vehicle Maintenance Category.
How to Change Battery in Nissan Key Fob – Easy Steps
While replacing the key fob battery in your Nissan model is a simple procedure, it does require handling sensitive and fragile electronics. It is recommended that you should wear a pair of gloves to protect the key fob from damage before you start working on the solution. Remember that a CR2032 3V battery powers the Nissan key fob. A multipack of these can usually be found for less than $5 USD so you can get another one from a nearby Nissan store. You will also need a tiny flathead screwdriver for this process. Now here is what you need to do.
Step 1 Flip the Key
At first, you will have to get the key in your hand and flip it from the backside. (Front side only has controls)
Step 2 Remove Slider
There is a small slider at its back that needs to be removed. This will unlock the emergency key for you. (Make sure you do it gently because the slider is very soft).
Step 3Open Notch
You will find an open notch at the top of the key fob which is between the front and back halves. You will use your screwdriver to open the key fob. (Rotate screws in an anticlockwise direction).
Step 4 Separate Both Halves
The screwdriver will help you to separate the back and front halves by turning the screw. It will give you access to the CR2032 3V battery inside it.
Step 5Take Battery Out
Now you have to use your screwdriver so that you can get the dead battery out of your Nissan key fob. (Don't discard it or throw it away on the road).
Step 6 Place New Battery
Now place the new battery inside the slot exactly the way you took the previously dead battery from it. (Make sure that the + side is facing down).
Step 7 Combine Halves
After you have adjusted the battery into place, now you have to line up the back and front halves of the key fob once again. Press them from both sides until a click sound pops and its done.
Step 8Replace Emergency Key
Now you will also have to replace the emergency key from the slot on the key fob. After you are done replacing the emergency key with a new one, move the slider into its position to make sure that the emergency key is safe. (Use the exact same model for the Nissan key fob).
This was a guide on how to change the battery in the Nissan key fob. In which all the easy steps for changing the battery in the Nissan key fob have been listed. You can use this procedure to change the battery on Nissan keyless entry car or any other such vehicle. For more details like replacing battery in key fob Nissan, see the FAQ section below.